Materials and Reagents
- 10 cm Petri dishes
 
- 50 ml Beckel centrifuge tubes
 
- 1.5 ml microcentrifuge tubes
 
- Amicon Ultra-15 centrifugal filter
 
- 0.45 µm immobilon-FL PVDF (EMD Millipore, catalog number:  IPFL00010  )
 
- Wild type MEF and Rab8a-/- MEF cell lines 
 
- MEF isolation and phenotypic analysis was previously described (Das et al., 2015)
 
- DEME with glucose, L-glutamine and sodium pyruvate (Mediatech, catalog number:  10-013  )
 
- Fetal bovine serum (FBS) (Sigma-Aldrich, catalog number:  F2442-500ML  )
 
- Pen-strep (Thermo Fisher Scientific, GibcoTM, catalog number:  15140-122  )
 
- Lactalbumin hydrolysate solution (50x) (Sigma-Aldrich, catalog number:  58901C-100ML  )
 
- NaN3
 
- NaF
 
- Na3VO4
 
- PMSF
 
- DTT
 
- Nonidet® P40 substitute (Sigma-Aldrich, catalog number:  74385-1L  )
 
- Bio-Rad protein assay dye reagent concentrate (Bio-Rad Laboratories, catalog number:  500-0006  )
 
- Tween® 20 (Thermo Fisher Scientific, Fisher Scientific, catalog number:  BP337-500  )
 
- Sodium chloride (NaCl)
 
- Potassium chloride (KCl)
 
- Disodium hydrogen phosphate (Na2HPO4)
 
- Potassium dihydrogen phosphate (KH2PO4)
 
- Protease inhibitor cocktail tablets (Sigma Aldrich, catalog number:  11873580001  )
 
- Skim milk powder (EMD Millipore, catalog number:  1.15363.0500  ) 
 
- Amersham ECL Western blotting detection reagents (GE Healthcare, catalog number:  RPN2209  ) 
 
- Amersham ECL Rabbit IgG, HRP-linked whole Ab (from donkey) (GE Healthcare, catalog number:  NA934V-1ML  )
 
- Wnt5a/b (C27E8) Rabbit mAB (Cell Signaling Technology, catalog number:  2530S  )
 
- Histone H3 (D1H2) XP® Rabbit mAb (Cell Signaling Technology, catalog number:  4499S  )
 
- 10% FBS DMEM (see Recipes)
 
- 1x LAH DMEM (see Recipes)
 
- Non-denaturing lysis buffer (see Recipes)
 
- 1% Tween 20 in PBS (PBST) (see Recipes)
 
- 5% skim milk in PBST (see Recipes)
 
- 1x running buffer (see Recipes)
 
- 1x transfer buffer (see Recipes)
 
Equipment
- Thermo IEC Centra CL3R Bench-model, Refrigerated centrifuge 
 
- Avanti J-26 XP centrifuge (Beckman Coulter, model:  Avanti J-26XP  )
 
- Beckman JA-25.50 rotor (Beckman Coulter, model:  JA-25.50  )
 
- Bio-Rad Mini-PROTEAN Tetra Cell (Bio-Rad Laboratories, model:  1658005EDU  )
 
- XCell SureLock® Mini-Cell and XCell II blot module (Thermo Fisher Scientific, NovexTM, catalog number:  EI0002  )
 
- QSonica XL-2000 (Qsonica, model:  XL-2000  )
 
- Ultrospec 2100® UV-Visible spectrophotometer (Biochrom, model:  80-2112-21  )
 
Procedure
- Cell culture/transfection- Culture wild type MEF and Rab8a-/- MEF cell lines in DMEM + 10% FBS until 90-95% confluent in a 10 cm Petri dish.
 
- Replace DMEM + 10% FBS with DMEM supplemented with 12 ml of 1x lactalbumin hydrolysate solution (LAH).
 
- Monitor the morphology of cells over the next 48 h. 
 
- After 48 h, collect the conditioned media in a 50 ml centrifuge tube and spin down at 10,000 x g at 4 °C for 10 min. Transfer the supernatant into a clean tube and immediately proceed with step B1 for maximum yield. Supernatant can be frozen and used after thawing but is generally not recommended. 
 
- Wash Petri dish with 1 ml of 1x PBS. Repeat wash.
 
- Subsequently add 1 ml of 1x lysis buffer to Petri dish and lay flat on ice for 15 min.
 
- Keeping the Petri dish on ice, collect the cell lysate using a cell scraper and transfer to a 1.5 ml microcentrifuge tube.
 
- Sonicate cell lysate briefly (no more than 1 or 2 sec at a time for 3 cycles) and then centrifuge at 13,300 x g at 4 °C for 10 min.
 
- Transfer supernatant to a clean microcentrifuge tube and store at -80 °C.
 
 
 
- Centrifugation of conditioned media
 - Take the conditioned media and add it to the Amicon Ultra-15 centrifugal filter.
 
- Centrifuge the filtration device at 4,000 x g at room temperature for 90 min.
 
- Use a 200 µl pipette to recover the concentrate. For maximum recovery, collect the concentrate immediately. Expect roughly, 180 µl of concentrated media from collection.
 
- Save the concentrate at -80 °C. Aliquot can remain frozen for up to a year.
 
 
 
- Western blot detection
 - Measure protein concentrate using Bradford assay (Bio-Rad reagent protocol). Use lysis buffer as a blank for protein measurements.
 
- Prepare 30 µg of total protein samples in 1x LDS sample buffer.
 
- Run samples in 10% SDS-PAGE gel at 80 V and immediately stop when dye runs off gel.
 
- Transfer protein onto a 0.45 µm PVDF membrane. Setup a transfer apparatus and run at 300 mA for 90 min.
 
- After transferring, take the PVDF membrane and block using 5% skim milk in PBST. Leave the membrane for blocking at room temperature on a shaker for 1 h.
 
- Subsequently, take the membrane and incubate overnight in a 1:1,000 dilution of anti-mWnt5a/b antibody at 4 °C. Dilute antibody in 5% skim milk in PBST.
 
- After 16 h of incubation in primary antibody, wash membrane in PBST and place on a shaker for 10 min. Repeat two more times for a total of three washes.
 
- Incubate with anti-rabbit antibody at a 1:2,000 dilution at room temperature for 1 h. Dilute antibody in 5% skim milk in PBST.
 
- Wash membrane in PBST and place on a shaker for 10 min. Repeat two more times for a total of three washes.
 
- Apply ECL reagent to membrane for 5 min.
 
- Proceed to expose x-ray film for 30 sec and develop.
 
 
Representative data

Figure 1. Detection of Wnt5a in conditioned media. Cell lysates and conditioned media from Rab8a+/+ and Rab8a-/- MEF visualized using anti-mWnt5a primary antibody. Histone3 was used as a control to determine contamination from cell lysate in media samples.
Recipes
- 10% FBS DMEM
 950 ml DMEM with 4.5 g/L glucose, L-glutamine & sodium pyruvate
 50 ml fetal bovine serum
 5 ml pen-strep
 
- 1x LAH DMEM (50 ml)
 49 ml DMEM with 4.5 g/L glucose, L-glutamine & sodium pyruvate
 1 ml lactalbumin hydrolysate solution (50x)
 
- Non-denaturing lysis buffer 
 50 mM Tris-HCl (pH 7.5)
 150 mM NaCl
 10 mM EDTA
 0.02% NaN3
 50 mM NaF
 1 mM Na3VO4
 0.5% Np40 substitute
 1 mM PMSF
 0.5 mM DTT
 Protease inhibitor cocktail tablets (1tablet for 10mL)
 
- 0.1% Tween 20 in PBS (PBST) (1 L)
 1 ml Tween® 20
 8 g NaCl
 0.2 g KCl
 1.44 g Na2HPO4
 0.24 g KH2PO4
 Dissolved in 1,000 ml MilliQ water, and pH adjusted to 7.4 using NaOH.
 
- 5% skim milk in PBST
 5 g skim milk powder dissolved in 100 ml PBST.
 
- 1x running buffer 
 3.0275 g Tris base
 14.4 g glycine
 10 g sodium dodecyl sulfate
 Dissolved in up to 1,000 ml of MilliQ water.
 
- 1x transfer buffer 
 14.4 g glycine
 3.02 g Tris base
 Dissolved in 700 ml of MilliQ water
 Add 200 ml methanol once completely dissolved.
 
Acknowledgments
This work was supported by National Institutes of Health (NIH) grants [DK102934, DK085194, DK093809, CA178599]. NG is also supported by a Research Scholar Grant [RSG-15-060-01-TBE] from the American Cancer Society.
References
- Das, S., Yu, S., Sakamori, R., Vedula, P., Feng, Q., Flores, J., Hoffman, A., Fu, J., Stypulkowski, E., Rodriguez, A., Dobrowolski, R., Harada, A., Hsu, W., Bonder, E. M., Verzi, M. P. and Gao, N. (2015). Rab8a vesicles regulate Wnt ligand delivery and Paneth cell maturation at the intestinal stem cell niche. Development 142(12): 2147-2162.
Article Information
  Copyright
 © 2016 The Authors; exclusive licensee Bio-protocol LLC.
Category
 Biochemistry >  Protein >  Immunodetection >  Western blot  
Cell Biology >  Cell signaling >  Development