Materials and reagents

Animal preparation

1. Dopaminergic neurons of the substantia nigra pars compacta (SNpc) from brain slices of adult (12–14 weeks old) mice

2. Isoflurane (AbbVie Deutschland GmbH and Co KG, catalog number: B506); storage: room temperature (RT)

3. Pattex Ultra Gel Matic (Henkel AG, EAN: 4015000444972)

4. Feather^® double edge blades (Plano, Feather, catalog number: 121-9)

5. Glycerol-based modified artificial cerebrospinal fluid (GACSF) (Ye et al., 2006) (see Recipes)

6. Artificial cerebrospinal fluid (ACSF) for current clamp recordings (see Recipes)

7. Artificial cerebrospinal fluid (ACSF) for Ca²⁺ current recordings in voltage clamp (see Recipes)

   
   

Artificial cerebrospinal fluid and electrode solutions

1. Calcium chloride 2-hydrate (CaCl₂·2H₂O), powder for analysis, ACS (AppliChem, catalog number: 131232); storage: RT

2. Potassium chloride (KCl) (Reag. USP) for analysis, ACS, ISO (AppliChem, catalog number: 131494); storage: RT

3. Magnesium chloride 6-hydrate (MgCl₂·6H₂O) (BP, Ph. Eur.) pure, pharma grade (AppliChem, catalog number: 141396); storage: RT

4. Sodium hydrogen carbonate (NaHCO₃) (Reag. USP) for analysis, ACS, ISO (AppliChem, catalog number: 131638); storage: RT

5. Sodium chloride (NaCl) for analysis, ACS, ISO (AppliChem, catalog number: 131659); storage: RT

6. Sodium di-hydrogen phosphate 1-hydrate (NaH₂PO₄·H₂O) (Reag. USP, Ph. Eur.) for analysis, ACS (AppliChem, catalog number: 131965); storage: RT

7. Sodium hypochlorite 14% Cl₂ (ClNaO) in aqueous solution (VWR, catalog number: 27900); storage: RT

8. Sodium hydroxide (NaOH) 1 mol/L (1 N) in aqueous solution (VWR, catalog number: 31627); storage: RT

9. D(+)-glucose anhydrous BioChemika (AppliChem, catalog number: A1422); storage: RT

10. HEPES for molecular biology (AppliChem, catalog number: A3724); storage: RT

11. Glycerol bioreagent, suitable for (insect) cell culture, suitable for electrophoresis, ≥ 99% (GC) (Sigma-Aldrich, catalog number: G2025); storage: RT

12. C₆H₁₁KO_7, potassium-D-gluconate (Sigma-Aldrich, catalog number: G4500); storage: RT

13. CsCl, cesium chloride (Sigma-Aldrich, catalog number: C4036); storage: RT

14. CsOH, cesium hydroxide 99.9% (Sigma-Aldrich, catalog number: 232041); storage: RT

15. EGTA, ethylene glycol-bis(2-aminoethylether)-N,N,N′,N′-tetraacetic acid (Sigma-Aldrich, catalog number: 03777-10G)

16. TEA, Tetraethylammonium chloride (Sigma-Aldrich, catalog number: T2265); storage: RT

17. Picrotoxin ≥ 97.5% (Roth, catalog number: 7093.1); storage: RT

18. CNQX, 6-Cyano-7-nitrochinoxalin-2,3-dion ≥ 98% (HPLC), solid (Sigma-Aldrich, catalog number: C127); storage: RT

19. DAP-5, DL-2-amino-5-phosphopentanoic acid solid (Sigma-Aldrich, catalog number: A5282); storage: RT

20. TTX, tetrodotoxin citrate (Biotrend, catalog number: ARCD-0640-1); storage: 4 °C

21. Tetramethylrhodamine-dextran, 3000 MW, anionic, lysine fixable (Thermo Fisher Scientific, Invitrogen, catalog number: D3308); storage: -20 °C

22. Biocytin (Sigma-Aldrich, catalog number: B4261); storage: -20 °C

23. Electrode solution (current clamp) (see Recipes)

24. Electrode solution (voltage clamp: Ca²⁺ currents) (see Recipes)

    
    

Ionophore preparation and patch clamp recordings

1. Dimethyl sulfoxide (DMSO) (Sigma-Aldrich, catalog number: D8418); storage: RT

2. Amphotericin B from Streptomyces sp. ~80% (HPLC), powder (Sigma-Aldrich, catalog number: A4888); storage: 4 °C

3. Microtubes, PP, 1.5 mL, with attached cap, BIO-CERT^® PCR QUALITY (Brand, catalog number: 780420)

4. Silver wire for electrodes (Science Products, catalog number: AG-10W)

5. Amphotericin B stock solution (see Recipes)

Equipment

1. Pipette puller (Narishige, model: PC-10)

2. Electrode borosilicate glass (Science Products, catalog number: GB150-8P)

3. Micromanipulator (Luigs-Neumann, model: mini 23)

4. Data acquisition unit [Cambridge Electronic Design Ltd. (CED), model: Micro 1401 MkII]

5. Patch clamp amplifier (HEKA, model: EPC-10 USB)

6. Temperature controller (Warner Instrument Corp., model: TC-324B)

7. Inline heater (Warner Instrument Corp., model: SH-27B)

8. Fixed stage upright microscope (Olympus, model: BX51WI) equipped with a 20× water-immersion objective (XLUMPLFL, 0.95 numerical aperture, 2 mm working distance, Olympus), a 4× magnification changer (U-TVAC, Olympus), infrared differential interference contrast optics (Dodt and Zieglgänsberger, 1990), and fluorescence optics

9. Vibratome (Leica, model: VT1200S)

10. Heating circulator (Julabo, model: ED)

11. Anesthesia machine (Groppler Medizintechnik, Univet, model: Porta)

12. Magnetic stirrer (VWR, catalog number: 12365-428)

13. Vortex mixer (Scientific Industries, Vortex Genie 2, model: SI-0256)

14. Ultrasonic bath (Bandelin Electronic, model: DT 31 H)

15. Centrifuge (Eppendorf AG, model: 5415 D)

16. Peristaltic pump (Ismatec, model: ISM597D) with Tygon tube (1.6 and 2.4 inner diameters, Ismatec, Tygon, catalog number: T3350)

17. Fine scissors, sharp (FST, catalog number: 14060-09)

18. Surgical scissors, blunt (FST, catalog number: 14001-14)

19. Double spatulas, micro (VWR, catalog number: 231-2261)

20. Slice anchor (Warner Instruments, model: SHD-26H/15)

Software

1. PatchMaster (HEKA, Ver. 2.32, www.heka.com)

2. Spike2 (Cambridge Electronic Design Ltd. (CED), www.ced.co.uk)

Procedure

1. Animals and preparation of mature/adult brain slices

   1. Lightly anesthetize the animal with isoflurane (5%).

   2. Decapitate the mouse with surgical scissors.

   3. Insert the fine sharp scissors into the spinal cord canal and make an incision by cutting along the midline of the skull from caudal to rostral to approximately the frontonasal suture.

   4. To open the skull, grab one side of the skull with the groove of the tissue forceps and rotate the forceps 180 degrees. Repeat the procedure with the other side of the skull.

   5. Remove the brain with a spatula: insert the spatula between the olfactory bulb and the rest of the brain and pull the mouse brain out.

      Note: Be as quick as possible (≤ 30 s), especially when dissecting older animals!

   6. Make two trim cuts (caudal, rostral) with a standard razor blade.

   7. Glue the brain onto the vibratome plate using Pattex Ultra Gel Matic.

   8. Cut the brain with the vibratome under 4 °C cold carbogenated (Carbogen, 95% O₂, 5% CO₂) GACSF (see Recipes) using a Feather^® razor blade.

   9. Vibratome settings: speed 0.06 mm/s; amplitude 1.05 mm; thickness 290 μm.

   10. Incubate the brain slices for 25–50 min in a recovery bath (carbogenated ACSF, see Recipes) at 37 °C.

   11. Keep the brain slices in carbogenated ACSF at RT. The slices should be used within 5 h.

   12. Place the brain slices in the recording chamber for the recordings held down with a slice anchor and superfused with carbogenated ACSF at the desired experimental temperature.

       
       

2. Preparation and usage of the ionophore (amphotericin B)

   1. Preparation

      1. Make a stock solution of amphotericin B by dissolving 4 mg of amphotericin B in 100 μL of DMSO.

      2. Sonicate the stock solution until the solution becomes a uniformly turbid yellowish solution.

      3. Vortex the stock solution several times.

      4. Prepare two 1.5 mL microtubes, each filled with 1 mL of electrode solution (for current or voltage clamp). A defined volume of amphotericin B stock solution (see Table 1) is added to 1 mL of electrode solution, while the solution in the other microtube remains free of amphotericin (tip fill). In our experience, a final amphotericin concentration of 160–200 μg/mL (4–5 μL stock solution) ensures excellent perforation and recording conditions for many neuron types. However, depending on cell type and recording mode (current clamp or voltage clamp), optimizing the amphotericin concentration might be useful or even necessary (for examples, see Table 1).

         
         

         Table 1. Recommended amphotericin B concentrations for different neuron types
         

         Recording mode	Neuron type	Amount of stock solution (μL)	Final amphotericin B concentration (μg/mL)
         Current clamp	Dopaminergic (DA) neuron (midbrain) (Hess et al., 2013)	4.5	180
         	Serotonergic neuron (dorsal raphe nucleus) (Xiao et al., 2021)	4	160
         	POMC neuron (hypothalamus) (Paeger et al., 2017)	4	160
         	AgRP neuron (hypothalamus) (Steculorum et al., 2016)	4	160
         	V2a neurons (spinal cord) (Reinoss et al., 2020)	20	800
         Voltage clamp	Dopaminergic (DA) neuron (midbrain) (Siller et al., 2022)	10	400

      
      

      5. Shake (by hand) the amphotericin B–containing electrode solution several times.

      6. Add 1% (0.1 mg/100 μL) tetramethylrhodamine-dextran to the amphotericin B–containing electrode solution. Tetramethylrhodamine-dextran is used to check the integrity of the cell membrane once the ionophore has perforated the membrane (for further explanation, see below.)

      7. Put all three solutions (stock, tip fill, and amphotericin B–containing electrode solution) on ice. The amphotericin B–containing electrode solution can be used for up to three hours. After that, prepare a fresh solution.

         
         

3. Setting up the perforated-patch clamp recording for current clamp

   1. Pull electrodes with resistances between 3 and 5 MΩ.

   2. Fill the electrode tips with plain electrode solution (tip fill without amphotericin B).

   3. For the backfill, use the amphotericin B–containing electrode solution.

   4. Put the electrode in the bath but do not apply positive pressure!

      Note: Commonly, in patch clamp recordings from brain slices, positive pressure is applied when the electrode is advanced to the cell to prevent clogging of the electrode tip and to clean the target cell. However, in this case, the amphotericin B–containing solution would be driven into the electrode tip, severely compromising seal formation.

   5. Only when the electrode is positioned directly in front of the cell, apply a slight positive pressure with the mouthpiece and continue to approach the cell. As soon as a dent forms in the cell membrane in front of the electrode, immediately release the positive pressure (Figure 1C).

   6. Apply gentle negative pressure with the mouthpiece and constantly monitor the test pulse (voltage clamp mode, holding potential: 0 mV, test pulse amplitude: 5 mV) and the seal resistance.

   7. Release the pressure after you have reached a seal resistance of > 600 MΩ.

      Note: Sometimes, you will not be able to reach a giga seal since the ionophore already starts perforating the cell membrane during the sealing process, which can take up to 20 min.

   8. Switch to current clamp and monitor the perforation process. Ideally, you should see a continuous transition from the on cell to the perforated configuration, as shown in Figure 1A.

      
      

      
      Figure 1. Perforation process. Original recordings showing the transition from the on-cell to the perforated-patch recording configuration under current clamp (A) and voltage clamp (B). Bottom: segments of the original traces shown in the top panel in higher time resolution. The numbers indicate the times from which the segments originate. (B). Voltage pulses (5 mV, 5 ms, HP = -60 mV) were applied every 10 s. Bottom left: test pulse before perforation (R_S > 100 MΩ), Bottom right: test pulse after perforation has reached a steady state (R_S < 20 MΩ). HP, holding potential. (C). Seal formation. Top: slight positive pressure forms a dent in the cell membrane in front of the electrode. Bottom: after releasing the positive pressure, negative pressure supports seal formation. Scale bar: 10 μm.

      
      

      The perforation process is reflected by an increase in action potential amplitude, indicating a decrease in series resistance. During this process, spontaneous conversions to the whole-cell configuration can occur, which become evident by an abrupt increase in action potential amplitude (Figure 2A). In many cases, this conversion is accompanied by hyperpolarization and the cessation of spiking activity (e.g., due to the opening of K_ATP channels).If no further changes in the parameters mentioned above occur, the perforation process is complete, and the actual measurements can begin.

      Note: To get meaningful measurements of electrophysiological properties of the investigated cell, the series resistance should ideally be well below 60 MΩ.

      
      

      
      Figure 2. Tetramethylrhodamine-dextran as a marker for rupture of the membrane. Spontaneous conversion from the perforated patch to the whole-cell configuration. (A). Current clamp recording with corresponding frequency plot showing the spontaneous rupture of the membrane patch during the perforation process. The arrow marks the jump in spike amplitude due to the rupture of the membrane. (B). Tetramethylrhodamine-dextran fluorescence is confined to the tip of the electrode, indicating the integrity of the membrane patch (top). After rupturing the membrane, tetramethylrhodamine-dextran has diffused into the neuron (bottom). Scale bar: 20 μm.

      
      

   9. During the recording, check the tetramethylrhodamine-dextran fluorescence regularly to see if the membrane patch in the electrode is still intact (Figure 2B). If not, terminate the recording.

      Adding tetramethylrhodamine-dextran helps significantly to monitor the integrity of the perforated patch. This is very useful since spontaneous ruptures of the membrane patch are often not immediately reflected in noticeable changes in the action potential amplitude and the series resistance once the membrane has been perforated. Due to its molecular weight of 3,000 Da, tetramethylrhodamine-dextran can neither permeate through the cell membrane nor the pores formed by the ionophores, making it possible to detect whether the membrane patch has been ruptured.

      Note: In our experience, tetramethylrhodamine-dextran does not compromise the quality of the recording. Although other fluorescent molecules may be suitable, checking whether they interfere with the recording is crucial.

      Once the perforated configuration is established, long-term recordings can be performed with a significantly minimized rundown compared to the whole-cell configuration. Figures 3–5 show examples of perforated-patch clamp recordings in different experimental settings, illustrating the possibilities of this recording configuration, e.g., in long-lasting current and voltage clamp experiments. A direct comparison between the whole-cell and perforated configurations is shown in Figure 3. In the whole-cell configuration, action potential frequency decreased dramatically within the first 10 min (Figure 3A). In contrast, the frequency remained stable in the perforated-patch clamp recordings (Figure 3B). This configuration is, therefore, particularly suitable for long-term (> 2 h) pharmacological experiments where it is desirable to demonstrate reversibility and reproducibility in the same recording. Such an experiment is shown in Figure 4, where cocaine was bath-applied and washed out twice.

      
      

      
      Figure 3. Time course of spontaneous action potential frequency from 30 min measurements in whole-cell (A) and perforated-patch recordings (B). Whole-cell recordings (n = 9); perforated-patch recordings (n = 11). The traces at the bottom correspond to the red symbols in the respective frequency plots.

      
      

      
      Figure 4. Long-term perforated patch clamp recording. Example of a neuropharmacological experiment (~2 h) using the perforated patch configuration. Top: action potential frequency (Hz) of a mouse dopaminergic (DA) substantia nigra pars compacta (SNpc) neurons during two exposures to 10 μM cocaine (COC). Blue dots indicate the instantaneous frequency, and the red line indicates the average frequency (bin size: 10 s). Middle: original recording. The numbers correspond to the sections displayed at the bottom. Current pulses were applied at the sections where gaps in the recordings occurred.

      
      

4. Setting up the perforated patch clamp recording for voltage clamp

   To perform voltage clamp experiments, follow steps 1–7 of section C and then continue with the following steps.

   Note: Higher amphotericin B concentrations might be useful (see Table 1).

   1. Switch the holding potential to -60 mV.

   2. Continue applying 5 mV test pulses in voltage-clamp mode (Figure 1B).

   3. Wait until the perforation has reached a steady state (stable current amplitude).

   4. Check the integrity of the membrane patch occasionally, as already described.

      Examples of successful voltage clamp recordings are given in Figure 5.

      
      

      
      Figure 5. Perforated patch voltage clamp recordings of voltage-activated Ca²⁺ currents (I_Ca). I_Ca was induced by depolarizing voltage steps to 0 mV (A) or -10 mV (B) from a holding potential of -60 mV every 10 s. A, B. Example of peak I_Ca in a mouse dopaminergic (DA) substantia nigra pars compacta (SNpc) neuron plotted over time during cadmium (A; 1 mM) or nifedipine (B; 10 μM) bath application. The numbers correspond to calcium current traces shown at the bottom.

      
      

5. Complementary application: single-cell labeling

   1. Use an electrode solution containing a tracer (e.g., biocytin).

   2. Perform the perforated-patch clamp experiment as described.

   3. After completion of the electrophysiological experiment, rupture the membrane patch either by gentle suction or by a large hyperpolarizing voltage pulse (~1–1.5 V) to allow cell labeling by diffusion of the tracer into the cell.

   4. Further processing of the brain slice containing the labeled neuron can be performed by using standard histological and immunohistochemical procedures.

      An example of successful labeling of a recorded neuron is given in Figure 6.

      
      

      
      Figure 6. Morphological and immunohistochemical characterization. Post-recording immunohistochemical identification of a dopaminergic (DA) neuron filled with biocytin after the electrophysiological experiment (current clamp). Top: single-cell staining of the DA neuron with biocytin-streptavidin. Scale bar: 50 μm. Inset: immunohistochemical co-labeling against tyrosine-hydroxylase (TH), a marker for DA neurons. Scale bar: 20 μm. Bottom: perforated-patch clamp recording (current clamp) of the labeled neuron showing pacemaker activity and a prominent ‘sag’ potential during hyperpolarization, both characteristic features of DA substantia nigra pars compacta (SNpc) neurons.

Data analysis

Data were recorded with the PatchMaster software (HEKA). Data were sampled at 10 kHz and low-pass filtered at 2 kHz with a four-pole Bessel filter. Data were analyzed with Spike2 and custom-made scripts written in Python 3.x.

Recipes

In the following recipes, the measured osmolarity is given. When composing solutions, we recommend that the osmolarity of the electrode solution (intracellular solution) be 10–20 mOsmol·L^-1 lower than the extracellular solution.

Animal preparation

1. Glycerol-based modified artificial cerebrospinal fluid (GACSF)

   225 mM glycerol

   2.5 mM KCl

   2 mM MgCl₂·6H₂O

   2 mM CaCl₂·2H₂O

   1.2 mM NaH₂PO₄

   21 mM NaHCO₃

   10 mM HEPES

   5 mM glucose

   Gassed with carbogen and adjusted to pH = 7.2 with NaOH, resulting in an osmolarity of 300–310 mOsmol/L.

   
   

2. Artificial cerebrospinal fluid (ACSF) for current clamp recordings

   125 mM NaCl

   2.5 mM KCl

   2 mM MgCl₂·6H₂O

   2 mM CaCl₂·2H₂O

   1.2 mM NaH₂PO₄

   21 mM NaHCO₃

   10 mM HEPES

   5 mM glucose

   Gassed with carbogen and adjusted to pH = 7.2 with NaOH, resulting in an osmolarity of ~310 mOsmol/L.

   Note: Block of glutamatergic and GABAergic synaptic input can be achieved by adding 0.1 mM picrotoxin, 0.05 mM DAP-5, and 0.01 mM CNQX to the ACSF.

   
   

3. Artificial cerebrospinal fluid (ACSF) for Ca²⁺ current recordings in voltage clamp

   66.5 mM NaCl

   20 mM CsCl

   40 mM TEA-Cl

   4 mM MgCl₂·6H₂O

   3 mM CaCl₂·2H₂O

   21 mM NaHCO₃

   10 mM HEPES

   5 mM Glucose

   0.001 mM TTX

   0.1 mM picrotoxin

   0.05 mM DAP-5

   0.01 mM CNQX

   Gassed with carbogen and adjusted to pH = 7.2 with HCl, resulting in an osmolarity of ~305 mOsmol/L.

   
   

Patch clamp recordings

1. Electrode solution (current clamp)

   141 mM K-gluconate

   10 mM KCl

   10 mM HEPES

   0.1 mM EGTA

   2 mM MgCl₂·6H₂O

   Adjusted to pH = 7.2 with KOH, resulting in an osmolarity of ~290 mOsmol/L.

   
   

2. Electrode solution (voltage clamp: Ca²⁺ currents)

   146 mM CsCl

   10 mM HEPES

   0.1 mM EGTA

   2 mM MgCl₂·6H₂O

   Adjusted to pH=7.2 with CsOH, resulting in an osmolarity of ~290 mOsmol/L.

   
   

Ionophore (amphotericin B) solutions

1. Stock solution

   100 μL of DMSO

   4 mg of amphotericin B

Acknowledgments

Work in the lab of PK is supported by grants KL 762/7-1 (401832153) and CRC 1451 TP A01 (431549029) and of the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) and the DFG’s Germany Excellence Strategy—EXC 2030-390661388. We thank Debora Fusca for providing Figure 1C.

This protocol was derived from the original work of Siller et al. (2022).

Competing interests

The authors report no declarations of interest.

Ethics

All animal procedures were conducted in compliance with guidelines approved by local government authorities (§4.17.020; §4.22.028; LANUV NRW, Recklinghausen, Germany).

References

1. Akaike, N. (1994). Glycine responses in rat CNS neurons studied with gramicidin perforated patch recording. Jpn J Physiol 44 Suppl 2: S113-118.
2. Akaike, N. and Harata, N. (1994). Nystatin Perforated Patch Recording and Its Applications to Analyses of Intracellular Mechanisms. Jpn J Physiol 44: 433-473.
3. Cattaneo, S., Regoni, M., Sassone, J. and Taverna, S. (2021). Cell-attached and Whole-cell Patch-clamp Recordings of Dopamine Neurons in the Substantia Nigra Pars Compacta of Mouse Brain Slices. Bio Protoc 11(15): e4109.
4. de Kruijff, B. and Demel, R. A. (1974). Polyene antibiotic-sterol interactions in membranes of Acholeplasma laidlawii cells and lecithin liposomes. III. Molecular structure of the polyene antibiotic-cholesterol complexes. Biochim Biophys Acta 339(1): 57-70.
5. de Kruijff, B., Gerritsen, W. J., Oerlemans, A., Demel, R. A. and van Deenen, L. L. (1974). Polyene antibiotic-sterol interactions in membranes of Acholeplasma laidlawii cells and lecithin liposomes. I. Specificity of the membrane permeability changes induced by the polyene antibiotics. Biochim Biophys Acta 339(1): 30-43.
6. Dodt, H. U. and Zieglgänsberger, W. (1990). Visualizing unstained neurons in living brain slices by infrared DIC-videomicroscopy. Brain Res 537(1-2): 333-336.
7. Hess, M. E., Hess, S., Meyer, K. D., Verhagen, L. A., Koch, L., Bronneke, H. S., Dietrich, M. O., Jordan, S. D., Saletore, Y., Elemento, O., et al. (2013). The fat mass and obesity associated gene (Fto) regulates activity of the dopaminergic midbrain circuitry. Nat Neurosci 16(8): 1042-1048.
8. Horn, R. and Marty, A. (1988). Muscarinic activation of ionic currents measured by a new whole-cell recording method. J Gen Physiol 92(2): 145-159.
9. Klöckener, T., Hess, S., Belgardt, B. F., Paeger, L., Verhagen, L. A., Husch, A., Sohn, J. W., Hampel, B., Dhillon, H., Zigman, J. M., et al. (2011). High-fat feeding promotes obesity via insulin receptor/PI3K-dependent inhibition of SF-1 VMH neurons. Nat Neurosci 14(7): 911-918.
10. Könner, A. C., Hess, S., Tovar, S., Mesaros, A., Sánchez-Lasheras, C., Evers, N., Verhagen, L. A., Brönneke, H. S., Kleinridders, A., Hampel, B., et al. (2011). Role for insulin signaling in catecholaminergic neurons in control of energy homeostasis. Cell Metab 13(6): 720-728.
11. Kyrozis, A. and Reichling, D. B. (1995). Perforated-patch recording with gramicidin avoids artifactual changes in intracellular chloride concentration. J Neurosci Methods 57(1): 27-35.
12. Lindau, M. and Fernandez, J. M. (1986). IgE-mediated degranulation of mast cells does not require opening of ion channels. Nature 319(6049): 150-153.
13. Myers, V. B. and Haydon, D. A. (1972). Ion transfer across lipid membranes in the presence of gramicidin A. II. The ion selectivity. Biochim Biophys Acta 274(2): 313-322.
14. Paeger, L., Pippow, A., Hess, S., Paehler, M., Klein, A. C., Husch, A., Pouzat, C., Brüning, J. C. and Kloppenburg, P. (2017). Energy imbalance alters Ca²⁺ handling and excitability of POMC neurons. eLife 6: e25641.
15. Reinoss, P., Ciglieri, E., Minere, M., Bremser, S., Klein, A., Lohr, H., Fuller, P. M., Buschges, A., Kloppenburg, P., Fenselau, H. and Hammerschmidt, M. (2020). Hypothalamic Pomc Neurons Innervate the Spinal Cord and Modulate the Excitability of Premotor Circuits. Curr Biol 30(23): 4579-4593 e4577.
16. Russell, J. M., Eaton, D. C. and Brodwick, M. S. (1977). Effects of nystatin on membrane conductance and internal ion activities inAplysia neurons. J Membr Biol 37: 137-156.
17. Siller, A., Hofer, N. T., Tomagra, G., Burkert, N., Hess, S., Benkert, J., Gaifullina, A., Spaich, D., Duda, J., Poetschke, C., et al. (2022). β2-subunit alternative splicing stabilizes Cav2.3 Ca²⁺ channel activity during continuous midbrain dopamine neuron-like activity. eLife 11: e67464.
18. Steculorum, S. M., Ruud, J., Karakasilioti, I., Backes, H., Engström Ruud, L., Timper, K., Hess, M. E., Tsaousidou, E., Mauer, J., Vogt, M. C., et al. (2016). AgRP Neurons Control Systemic Insulin Sensitivity via Myostatin Expression in Brown Adipose Tissue. Cell 165(1): 125-138.
19. Tajima, Y., Ono, K. and Akaike, N. (1996). Perforated patch-clamp recording in cardiac myocytes using cation-selective ionophore gramicidin. Am J Physiol 271(2 Pt 1): C524-532.
20. Urry, D. W. (1971). The Gramicidin A Transmembrane Channel: A Proposed π(L,D) Helix. Proc Natl Acad Sci U S A 68(3): 672-676.
21. Xiao, X., Yeghiazaryan, G., Hess, S., Klemm, P., Sieben, A., Kleinridders, A., Morgan, D. A., Wunderlich, F. T., Rahmouni, K., Kong, D., et al. (2021). Orexin receptors 1 and 2 in serotonergic neurons differentially regulate peripheral glucose metabolism in obesity. Nat Commun 12(1): 5249.
22. Ye, J. H., Zhang, J., Xiao, C. and Kong, J. Q. (2006). Patch-clamp studies in the CNS illustrate a simple new method for obtaining viable neurons in rat brain slices: glycerol replacement of NaCl protects CNS neurons. J Neurosci Methods 158(2): 251-259.