Welcome guest, Sign in

Home

X
加载中

Proteins of Saccharomyces cerevisiae can be metabolically labeled with (35) methionine. After labeling, a protocol is described for the mechanical disruption of yeast cells or conversion to spheroplasts, with subsequent lysis before immunoprecipitation of the proteins.

Thanks for your further question/comment. It has been sent to the author(s) of this protocol. You will receive a notification once your question/comment is addressed again by the author(s).
Meanwhile, it would be great if you could help us to spread the word about Bio-protocol.

X

[Bio101] Metabolic Labeling of Yeast Proteins

Biochemistry > Protein > Labeling
Author: Zongtian Tong
Zongtian TongAffiliation: Department of Cell Biology, Center for Metabolism and Obesity Research, Johns Hopkins School of Medicine, Baltimore, USA
For correspondence: tongzong@gmail.com
Bio-protocol author page: a14
1/5/2011, 5651 views, 0 Q&A, How to cite
DOI: https://doi.org/10.21769/BioProtoc.13

[Abstract] Proteins of Saccharomyces cerevisiae can be metabolically labeled with (35) methionine. After labeling, a protocol is described for the mechanical disruption of yeast cells or conversion to spheroplasts, with subsequent lysis before immunoprecipitation of the proteins.

Materials and Regents

  1. TRAN35S-label (MP Biomedicals)
  2. Methionine
  3. FLAG peptides
  4. Immunoprecipitation buffer
  5. Digitonin (EMD Chemicals)
  6. 1x SDS
  7. Medium minus methionine (SD-Met)

Equipment

  1. Bench-top centrifuges 
  2. Charcoal filter paper
  3. 50 ml conical tube
  4. 125 ml Erlenmeyer flask with vented cap (Nalgene)
  5. O-ring cap tube
  6. Geiger counter
  7. Labeled radioactive beaker
  8. Kimwipes
  9. 1.5 ml Eppendorf tubes

Procedure

  1. The evening before labeling, set up several 25 ml cultures, inoculated at different densities, so that first thing the next morning, at least one of the cultures will be at an OD of~0.5.
  2. Labeling requires a 25 ml culture of yeast at an OD of between 0.4 and 0.6. When the OD of the culture is ~0.4 to 0.6, transfer the culture to a 50 ml conical tube. Centrifuge at 2,000 rpm for 5 min at room temperature (RT).
  3. Pour off supernatant. Resuspend the yeast pellet in 25 ml of warm medium minus methionine (SD-Met). Return cells to flask and grow for 1 h.
    If temperature-sensitive yeast is used, shift to the restrictive temperature during the last 30 min of the starvation period. 
  4. Read the OD of the culture. Transfer the culture to a 50 ml conical tube. Centrifuge at 2,000 rpm for 5 min at RT.
  5. Pour off supernatant. Resuspend the pellet in 15 ml warm medium minus methionine (SD-Met) to give a final OD of 1 (total OD of 15). Transfer it to Nalgene 125 ml Erlenmeyer flask with vented cap.
  6. Add 100 Ci of TRAN35S-label (a mixture of [35S] methionine and [35S] cysteine) per ml, e.g. 1.5 mCi for 15 ml culture). Incubate at 37 °C for 2 h. The total OD will probably reach 25 OD.
    Thaw [35S] in the hood. Use pipettes with filters. Wrap the flask with charcoal filter paper.
  7. Pour the labeled culture into a 50 ml conical tube. Use Kimwipe to wipe off the last drop from the Nalgene flask. Spin down yeast cells in Centrifuge 5810R at 3,000 rpm for 3 min. Wear 3 M mask while unwrapping the charcoal filter paper, which is contaminated with S35 labeled volatile acids. 
  8. Resuspend cells in 10 ml of H2O. Wash twice. Proceed to small scale native affinity purifications of solubilized membrane proteins protocol.
  9. Prepare 10 ml of H2O in 15 ml conical tubes. Pour water into tubes containing labeled cells, close cap and swirl the tube to resuspend cell pellet. 
  10. For the last wash, leave ~1 ml supernatant. Resuspend the pellet and transfer the cell suspension into an o-ring cap tube using a 5 ml serological pipette.
    Avoid using Pipetman, which can be contaminated during the procedure. Serological pipettes can be disposed to radioactive solid waste.

Notes

Important notice for performing small-scale purification of solubilized membrane proteins from S35 labeled yeast extracts.

  1. General advice: Use o-ring cap tubes instead of 1.5 ml Eppendorf tubes; Always use barrier pipette tips instead of regular ones; tips and serological pipettes that touch radioactive material should be disposed in radioactive waste.
  2. Add one scoop of glass beads into an empty o-ring cap tube. Then transfer S35 labeled cell suspension (~150 μl) into the tube containing glass beads.
  3. Dilute the supernatant from 100,000 x g spin. Dilute 800 μl supernatant to 4 ml in total.
  4. After incubation with ANTI-FLAG M2 affinity gel, spin down the resin. Use serologicalpipette to transfer 3 ml supernatant to radioactive liquid waste. Transfer 1 ml resin containing solution into a fresh o-ring cap tube. No need to save input or unbound, which is too radioactive on the membrane.
  5. Wash the resin 4 times with 1 ml immunoprecipitation buffer with 0.1% digitonin as usual. You can use a labeled radioactive beaker for liquid waste temporarily, and then dump all the waste to designated radioactive liquid waste. 
  6. After elution with FLAG peptides, collect bound proteins. Then add 1x SDS dye to the resin and boil it. The resin is still quite radioactive, handle with respect.

Important notice for running SDS-PAGE and Western Blot transfer with radioactive material.

  1. Load the gel with radioactive samples in a designated radioactive area.
  2. Assemble cassette for transfer in the designated area. After transfer, use Geiger counter to check membrane, gel, filter paper, etc. Usually, the membrane is radioactive, while the rest is not.
  3. Place the protein side of the membrane onto Saran Wrap, which will not block radioactivity. Place aluminum foil on the back side of the membrane to block radiation. Tape this onto a film cassette and place a film on the protein side of the membrane.

Acknowledgments

This protocol has been modified and adapted in the Espenshade Lab, Johns Hopkins School of Medicine. Funding to support different projects that have used this protocol has come from NIH – National Heart, Lung, and Blood Institute, National Institute of Allergy and Infectious Diseases, the Pancreatic Cancer Action Network, and the American Heart Association.

References

  1. Sacher, M., Jiang, Y., Barrowman, J., Scarpa, A., Burston, J., Zhang, L., Schieltz, D., Yates, J. R., 3rd, Abeliovich, H. and Ferro-Novick, S. (1998). TRAPP, a highly conserved novel complex on the cis-Golgi that mediates vesicle docking and fusion. EMBO J 17(9): 2494-2503.


How to cite: Tong, Z. (2011). Metabolic Labeling of Yeast Proteins. Bio-protocol Bio101: e13. DOI: 10.21769/BioProtoc.13; Full Text



Share Your Feedback:

  • Add Photo
  • Add Video

Bio-protocol's major goal is to make reproducing an experiment an easier task. If you have used this protocol, it would be great if you could share your experience by leaving some comments, uploading images or even sharing some videos. Please login to post your feedback.

Q&A and Troubleshooting:

  • Add Photo
  • Add Video

Please login to post your questions/comments. Your questions will be directed to the authors of the protocol. The authors will be requested to answer your questions at their earliest convenience. Once your questions are answered, you will be informed using the email address that you register with bio-protocol.
You are highly recommended to post your data (images or even videos) for the troubleshooting. For uploading videos, you may need a Google account because Bio-protocol uses YouTube to host videos.


Login | Register